Phonocar Solar BT Hands free kit 6/850
Phonocar 8/650 Solar Bluetooth Car Kit (Hands Free ) 1. Product Description Avantalk Phonocell 6/850 is a Bluetooth handsfree-unit with Text-To-Speech- Function and Solar recharge. The functions of echo-cancellation and noiseelimination assure the best communication-quality while driving. Introduce the handsfree-unit into the transparent cover and position it on the left upper corner of the windscreen, at the driver’s seat, for an increased quality of your phone conversation-audio. 2. Product 1. Mute-key 2. Volume increase 3. Handsfree-holder for windscreen 4. Microphone 5. Multi-function-key (MFB) 6. Micro USB-drive 7. Volume decrease 8. Loudspeaker 3. Recharge The Avantalk
Phonocell 6/850 is fitted with an internal re-chargeable battery.
Attention: completely. Recharge inside car Recharge through USB of a USB-cable. To recharge battery completely will take about 3 hours. The LED will remain red during the recharging-process and will turn out when recharging-process has been completed. Solar Panel The 6/850 self-recharges by means of a solar panel. Given that the handsfree-unit receives direct sun-light for 2 hours, a conversation-time of about one hour will be possible. With the help of the solar recharge-panel, the battery-autonomy will increase, with a consequent longer conversation and stand-by-time, with no need of turning to a battery recharge-unit. Attention: Please avoid to use other re-charging units than the Original supplied, as this could damage or even destroy your handsfree-unit. 4. Connection mobile phone – handsfree unit 1) Position handsfree-unit and mobile-phone at a maximum distance of 1 metre. 2) Keep handsfree-unit switched-off and press “MFB”-key for 5 seconds, until the time the orange Led starts flashing. 3) Activate the Bluetooth-function on the mobile-phone and search for the handsfree-unit. This procedure is described in your mobile-phone Instructions- Manual. 4) Select “ Phonocell Avantalk” from the Devices-List. 6) Insert code “0000” and press “OK” to connect the mobile-phone to the handsfree-unit. Some mobile-phones are automatically connectable to handsfreeunits. It is advisable to “accept” the automatic connection to the handsfreeunit, so that the connection-procedure needs not be repeated every time the handsfree-unit is switched-on. 7) The connection-confirmation is announced by the vocal message “PHONE IS READY FOR USE”. Once connected, the handsfree-unit will be in stand-by-mode, with the orange Led flashing every 3 seconds. The unit has an operation-field of 10 metres. NOTE: connection does not take place within such period, the procedure will have to be repeated. 5. Basic Operations 5.1 Handsfree-Unit On/Off Switch-on: (vocal message “POWER ON”) Switch-off: OFF”) Note: it remains unconnected for more than 10 minutes. 5.2 Answering the phone Press “MFB”-key. 5.3 Refusing a phone-call When it rings, keep the “MFB”-key pressed for 3 seconds. The vocal message announcing the calling phone-number will be repeated for some seconds. 5.4 Repeating last phone-call Press the “MFB”-key twice. 5.5 Interrupting phone-call Press “MFB”-key briefly. 5.6a
5.6b Transferring a phone-call from the mobile-phone to the handsfree-unit: press “MFB”-key. 5.7 Activate/Deactivate Microphone During the phone-call, keep “MUTE”-key pressed for 3 seconds to deactivate the microphone. Press “MUTE” again for 3 seconds, to reactivate the microphone. 5.8 Privacy-Mode During the phone-conversation, press “MUTE”-key once, so that the Volume of the handsfree-unit will decrease to its minimum and the handsfree-unit can be used as mobile-phone. 5.9 Voice-Call If the mobile-phone is fit for Voice-call, press “MFB” briefly while in stand-bymode and pronounce the name of the person you wish to call, after the beepsignal. NOTE: The functions of the mobile-phone vary from one model to another. That is why you should always refer to the related mobile-phone Instructions Manual. 6. Text- to- Speech 6.1. Activate/Deactivate Text-To-Speech To activate/deactivate the TTS-function, keep “V+”-key pressed for 6 seconds while in stand-by-mode. Vocal message “VOICE PROMPT OFF” or “VOICE PROMPT ON”. 6.2. Text-To-Speech (Language-Option) Choose one of the 5 Languages available on the handfree-unit. While in stand-by-mode, press “V+” for 3 seconds until the LED flashes 3 times and the handsfree-unit starts the vocal message “SELECT LANGUAGE”. Repeat same procedure also to select the requested language in the following sequence: English, French, Italian, German, Spanish. 6.3. Transfer the list of phone-numbers from your mobile-phone to the handsfree-unit While in stand-by-mode, keep MUTE-key pressed for 3 seconds to charge the List of phone-numbers from your mobile-phone onto the handsfree-unit. You will hear the vocal message “PLEASE WAIT” and the LED remains switched-on. This procedure will take some minutes. As soon as the List of phone-numbers has been transferred, the handsfree-unit will start the vocal message “contact saved” and “NUMBERS OF PHONEBOOK-DATA RECEIVED FROM MOBILE-PHONE
NOTE: 1. In case that the List of phone-numbers should not have been transferred, the handsfree-unit will advise “PHONEBOOK-CHARGING FAILED”. The Phonebookfunction varies from one mobile-phone to the other and not all mobile-phones are fitted with this function. You have to check whether or not the Phonebookfunction is supported by your mobile-phone. ATTENTION The Phonebook data memorized on the handsfree-unit will automatically be erased when another mobile-phone is connected. TOTAL RESET OF THE UNIT Keep the keys V+ e V- contemporarily pressed for 10 seconds, until the LED starts flashing. Leave the two keys and press them again for 2 seconds. The handsfree-unit will make the announcement “RESET FACTORY COMPLETED”
7. Product Specifications Bluetooth: Bluetooth 2.0+ EDR-specifications Working Frequency: 2.4GHz ~ 2.48GHz Exit Power: Class 2, up to 10 metres Supported profiles: HSP • HFP 1.5 Languages supported by the TTS: English, French, Italian, German, Spanish. List of phone-numbers (Phonebook): Memory-capacity up to 1,000 contacts Number of connectable mobile-phones: max. 8 DSP integrated Built-in Loudspeaker and Microphone Stand-by Time : up to 450 hours Conversation Time: 11-13 hours Battery Charging Time: by means of USB/AUTO, about 3 hours. By means of solar panel, about 18 hours. Charger Tension: DC 5.0V 400mA Battery Type: 550mA (Lithium rechargeable type) and will then switch-off. PHONEBOOK AND sim-card”. Should the memory of the handsfree-unit be full, the handsfree-unit will save the contacts and make the announcement “PHONEBOOK FULL”. When the handsfree-unit and the mobile-phone are paired for the second time, the handsfree-unit will NOT transfer the List of phone-numbers (Phonebook) again. It is possible to up-date the Phonebook manually, by keeping the “Mute” pressed for 3 seconds, while in stand-by-mode. The handsfree-unit will automatically erase the data saved and will then be ready to receive the new up-dated List of phone-numbers from the mobile-phone. Transferring a phone-call from the handsfree-unit to the mobile-phone: during the phone-call, press “MUTE”-key twice.
No posts found
Add new post